- ページ 5
カメラアクセサリー Cinematography Electronics Cinetape 2のPDF 操作説明をオンラインで閲覧またはダウンロードできます。Cinematography Electronics Cinetape 2 5 ページ。
ページを印刷するDisplay Brightness Adjustment (br)
Display Brightness is the first item to be accessed through the Power-up Menu and is adjustable in 15
steps. This is useful for comfortable viewing in different lighting conditions. The abbreviation "br" is
used for brightness. The lowest setting is "br 1" and the brightest setting is "br 15". Adjust the
brightness to the desired level by turning the Red knob. The display shows the new brightness setting
and varies as it is adjusted. The new setting is saved into memory by momentarily pushing (click) the
red knob, which also advances the Power-up Menu to the Close Focus Distance Adjust.
The CineTape Air App also has a Display Brightness. Available at the Apple iTunes store.
Close Focus Distance Adjustment (CL) Near Limit
The Close Focus Distance is the second item accessed through the Power-up Menu. The Close Focus
Distance is also known as the Near Limit and is the minimum distance that the CineTape2 senses.
The abbreviation "CL" is used for close. It is adjustable in 15 steps from "CL 7" to "CL 21",
corresponding to about 1 foot (30 cm) to 3 feet (90 cm), respectively. This is a useful setting when it is
necessary to ignore something in the foreground near the sensors, such as a Matte Box, French flag,
monitor or cable. Adjust the near limit close focus to the desired distance by rotating the Red knob.
The new setting is saved into memory by momentarily pushing (click) the red knob, which also
advances the Power-up Menu to the Display Resolution Adjustment.
Display Resolution Adjustment (rE)
The Display Resolution is the third item accessed through the Power-up Menu. The Display Resolution
is the amount of distance rounding-off that is shown on the CineTape2 display. Reducing the
resolution (Increasing the rounding-off) is useful when a more stable display is desired. The resolution
setting is the third item accessed through the Power-up Menu. This setting shows as "rE x" or "rE –x"
where "rE" is the abbreviation for resolution and "x" is the amount of rounding-off. The displayed minus
sign (-) is the graphical representation for plus or minus (+/-). The four resolution settings are; 1, 2, -1
& -2.
•
The '1' setting is the normal (maximum) setting and maintains the displayed distance until the
actual (physical) distance change is greater than 1 unit. (This is the factory setting)
•
The '2' setting maintains the displayed distance until the actual (physical) distance change is
greater than 2 units. Only even numbers are displayed.
•
The '-- 1' setting maintains the displayed distance until the actual (physical) distance change is
plus or minus (+/-) 1 unit.
•
The '-- 2' setting maintains the displayed distance until the actual (physical) distance change is
plus or minus (+/-) 2 units. Only even numbers are displayed.
Adjust the Display Resolution to the desired level by rotating the Red knob. The new setting is saved
into memory by momentarily pushing (click) the red knob, which also advances the Power-up Menu to
the Feet/Meters Selection.
Feet or Meters Selection (FM)
The Feet/Meter selection is 4
or M for Meters. All of the distance readings and focus-plane calculations convert automatically to the
selected units. When in the Feet mode, the left two digits indicate "feet" and the right two digits
indicate "inches". When in the Meters mode, the left two digits indicate "meters" and the right two digits
indicate "centimeters". The new setting is saved into memory by momentarily pushing (click) the Red
knob, which closes the Power-up Menu.
OPERATING INSTRUCTIONS
CINETAPE 2
th
item in the Power-Up Menu. Rotate the red knob and select 'F' for Feet
Page 5 of 5