- ページ 5

サブウーファー Alphasonik ALPHA 400 PSW410EのPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。Alphasonik ALPHA 400 PSW410E 20 ページ。 Alphasonik speaker user manual

PROPRIETARY HEAT SINK

All Alphasonik 400 Series subwoofers have motor structures encased in pat-

ent pending, cast aluminum, machine finished heat sinks. Power handling is

enhanced because excess heat is quickly absorbed and transferred to the

environment. The music may get hot but our subs run cool.

MINERAL FILLED POLYMER INVERTED DOME

All Alphasonik 400 Series Subwoofers use the latest technology with mineral

filled polymers for musical neutrality. The inverted dome geometry can handle

tremendous stress without deformation.

EPDM SURROUND

All Alphasonik 400 Series Subwoofers employ EPDM surrounds. This high-

tech synthetic rubber exhibits both high tensile strength and compliance over

a wide range of temperatures.

PSW410E

10" ALPHA 400 SERIES SUBWOOFER

Proprietary Heavy Gauge Stamped Steel "Alpha" Basket

Proprietary Cooling Rings for Motor Assembly (Patent Pending)

High Rigidity Inverted Dome Mineral-Filled Composite Cone

EPDM Surround for Enhanced Control at Extreme Temperatures

Flat Progressive Rate Nomex® Damper w/ Spiral-Woven Leads

46 oz. Double Stack Magnet

Rated at 400 Watts RMS

90dB Efficiency

Frequency Response of 30Hz to 500Hz

Dual 4 ohm 2" Voice Coils

8-Gauge Sure-Lok Input Terminals

Mounting Dimensions — Depth: 139mm / 5 1/2"

Through Hole: 236mm / 9 3/8" Diameter: 277mm / 10 15/16"

PSW412E

12" ALPHA 400 SERIES SUBWOOFER

Proprietary Heavy Gauge Stamped Steel "Alpha" Basket

Proprietary Cooling Rings for Motor Assembly (Patent Pending)

High Rigidity Inverted Dome Mineral-Filled Composite Cone

EPDM Surround for Enhanced Control at Extreme Temperatures

Flat Progressive Rate Nomex® Damper w/ Spiral-Woven Leads

46 oz. Double Stack Magnet

Rated at 500 Watts RMS

91dB Efficiency

Frequency Response of 25Hz to 500Hz

Dual 4 ohm 2" Voice Coils

8-Gauge Sure-Lok Input Terminals

Mounting Dimensions — Depth: 151mm / 6"

Through Hole: 282mm / 11 1/8" Diameter: 325mm / 12 7/8"