- ページ 8

照明器具 Cineo LB800のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Cineo LB800 19 ページ。 C2 os operating system

HSIK Controls

Wheel Control

The Wheel Cursor and Slider controls are

the simplest methods for controlling the

fixture and are available when the

fixture is in 1 or 2-Zone modes. Select

the Wheel icon, and a color wheel and

four sliders appear: DIM, CCT and HUE

and SAT. If the +/- Green Personality is

selected, this slider also appears. The

Wheel Cursor can be moved within the

color wheel to select desired saturated

color, along with the amount of

saturation added to the CCT value, set

on the slider. Using the Sliders, values

can more accurately be set. For further accuracy, press and hold the value displayed below the Slider. A keypad

is displayed so precision values can be entered.

Shortcuts are provided by tapping on either side of the slider to jump to the next or previous logical value for

the control. These are:

DIM: Increase or decrease the output in increments of 20% by tapping on either side of the slider.

CCT: Tap the slider bar to jump between 2700, 3200, 4300, 5600, and 6500.

HUE: Tapping this slider bar jumps between the six primary and secondary saturated colors.

SAT: Increases or decreases the percentage of shift from the selected CCT to the selected saturated color.

+/- G: Presets are available at .25, .5 and Full, emulating standard gels.

All control screens include the ability to

save current settings as either a Preset

or Effect, with buttons present at the

bottom of all control screens. This will

be explained in a following section.

The Home icon in the upper left corner

always returns you to the Home screen,

while the arrow icon in the upper right

corner returns you to the previous

screen. The network icon shows the

status of network connections, as well

as displaying the network menu.

2-Zone Control