- ページ 4

照明器具 Cineo Matchstix 5600のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Cineo Matchstix 5600 10 ページ。

System Components, Connections and Controls

Cineo Matchstix Lamphead

The Matchstix lamphead is externally powered by any 12vDC power source capable of

delivering 100 mA per inch, i.e. a 12" Matchstix will require 1.2A of DC power at 12V; a 6"

model requires 600mA @ 12VDC. Multiple Matchstix can be attached to a single power source

using optional 2-way and 4-way splitters. Make sure that the total load does not exceed the

current rating of the power supply.

The lamphead includes a 5.5mm x 2mm co-ax connector for

supplying power. Please note that there are many different

co-ax connectors that look very similar, and are not

interchangeable. All products purchased

from Cineo or LiteGear maintain

complete compatibility

by adhering to the

5.5mm x 2mm

connectors.

LiteGear Power Supplies

Matchstix can be used with virtually any nominal12VDC power source, including camera

batteries, car lighter sockets, etc. Accessory cables are sold for connection to various power

sources.

D-Tap

AC/12VDC

Power Supply

Cigar Jack

Cineo includes DC power supplies

from LiteGear with the Matchstix

Power kits and DuoPro kits.

These kits are shipped by default

with the 12V, 4A power supply,

although 8A and 15A power

supplies are also available for

larger installations.

When confi guring lighting arrays,

be sure that the overall amperage

load of the Matchstix does not

exceed the output of the power

source. Overall load calculation is

simple: every one inch of Matchstix on

a 12V power source draws 100mA.

Dimming

Matchstix can be used with many in-line DC dimmers, although fl icker-free operation is

guaranteed by using LiteGear local and DMX dimmers.