ページを印刷するWarnings, Disclaimers and Warranty
Risk of Electric shock / Risk of Fire
Do not open. To reduce the risk of electric shock, do not remove cover (or back). No user-
serviceable parts inside. Refer servicing to qualified service personnel.
Burning Injuries
Be aware of high temperatures in excess of 50°C inside the fixture during and after use. Do
not touch the LEDs to avoid burning injuries.
Flammable Materials
Keep flammable materials away from the installation. Insure that the amount of air flow
required for safe operation of the equipment is not compromised. Proper ventilation must be
provided.
ESD and LED's
LED components used in the Lightblade Edge are ESD (Electro-Static Discharge) sensitive. To
prevent the possibility of destroying LED components do not touch either while in operation or
when switched off.
This Equipment MUST be Grounded
In order to protect against risk of electric shock, the installation should be properly grounded.
Defeating the purpose of the grounding type plug will expose you to the risk of electric shock.
AC Power Cords
Use only a rated IEC Connector. The user is responsible for ensuring power cables are of
adequate condition for each application. If the power cords are damaged, replace them only
with new ones.
Environmental: Disposal of Old Electrical & Electronic Equipment
This product shall not be treated as household waste.
14