ページを印刷するOPERATION
TURNING ON:
Turn on the headset by pressing the On/Off Multi function
button for three seconds. The status LED will flash blue rapidly
indicating that the headset is searching for a device that has
been paired already. Once connected, the LED will flash blue
slowly. After the device has been learned, it will automatically
connect when in range.
BLUETOOTH MODE:
1.
Connecting a device (see section Bluetooth Connection).
2.
Start playback on the device and use the headset or
source unit to control the playback.
(NOTE: VOLUME CONTROL)
The volume settings on the source unit also
affect the playback volume on the headset.
8
OPERATION CONTINUED
WIRED MODE:
1.
Using the 3.5mm cable, connect one end to your audio
source and the other end to the 3.5mm audio port.
2.
Control the playback on the source unit.
(NOTE: VOLUME CONTROL)
The volume settings on the source unit also affect the
playback volume on the headset.
TURN OFF:
Turn off your headset by holding down the On / Off multi
function button for three seconds. The status LED will
illuminate red briefly and then turn off.
9