- ページ 3

超音波ジュエリークリーナー Cinetech BSF HYDRA CLEANのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Cinetech BSF HYDRA CLEAN 20 ページ。 Motion picture film cleaner

ページを印刷する

SAFETY WARNING

1.
Follow all warnings and instructions marked on the product and in the manual.
2.
Save these instructions for later use. Require all operators of the BSF HYDRA CLEAN to read
this manual.
3.
Before you connect the power, be sure the nominal voltage of BSF HYDRA CLEAN corresponds
to the voltage for your locality.
4.
Unplug the BSF HYDRA CLEAN from the power source before opening the rear door and
performing service.
5.
Never spill liquid of any kind on the BSF HYDRA CLEAN.
6.
Slots or openings, in the cabinets (including the spacing above the floor) are provided for
ventilation. These openings must be kept unobstructed to prevent vapor build-up.
7.
BSF HYDRA CLEAN is equipped with IEC-60320 C14 grounding type AC power line connector.
Connect it only to a grounding type of power outlet. This is a safety feature. Be certain that the
power cord is the correct one for your locality.
8.
Do not allow anything to rest on the power cord. Do not locate this product where people can
step on the power cord or trip on it.
9.
Never push objects of any kind into the openings of electronic equipment as they may come in
contact with dangerous voltages, causing electrical shock or fire.
10. Use only Isopar G as the solvent.

ISOPAR G SAFETY PRECAUTIONS

1.
CAUTION: Poisonous. Do not ingest. Is FLAMMABLE. See "Material Safety Data Sheet" (MSDS)
for your solvent. Isopar G is stable under normal operating conditions; however, it has a flash
point of 42°Celsius (107.6°Fahrenheit)
2.
Keep flammable solvents away from fire, sparks, or open flame. Keep fire and open flame away
from the machine when flammable solvent is present. No smoking.
3.
To prevent fire: Discharge static electricity by touching the metal frame before touching objects
surrounded by flammable vapours.
4.
Fill the solvent reservoir at the beginning of each shift and as required.
5.
Refill the cleaning solvent reservoir with care. If spillage occurs, use suitable absorbent material,
and dispose of appropriately.
6.
Provide adequate room volume and ventilation. See section "Providing Ventilation".
Read these warnings, the installation instructions, and the
operating instructions before using the BSF HYDRA CLEAN
machine. These precautions are for your own safety.
IN CASE OF FIRE
Extinguish using water fog, foam, dry chemical or carbon
dioxide If a film is contaminated with water, re-clean the film
immediately with fresh solvent to prevent water spotting on
the film.
DO NOT OPERATE THE MACHINE IF THE AMBIENT
WORKING AREA TEMPERATURE EXCEEDS
40° CELSIUS (104° FAHRENHEIT)
Page 3 of 20