- ページ 3

カメラアクセサリー Alphatron PEDESTRALのPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。Alphatron PEDESTRAL 7 ページ。

3. SETTING UP INSTRUCTION

3A NORMAL SET-UP:

- Place your folded Pedestal up-side-down (see picture). Unlock the Dolly Legs (14) using the

Locking Knob (16). Release them as much as is necessary to take out the leg and set it parallel

to the Dolly Housing (15). Then push it into the Housing, glide the Shift Block (17) into the

alternate position and fix the leg with the same locking knob. Do the same for the other legs.

- Place the Pedestal right up on the dolly wheels, spreading the spider legs if necessary.

- Turn the Tensioning Pens (13) clockwise to make it possible to place the Spider Legs on top of

them. After placing all three, tension them with the Pens turning them counter clockwise.

- Lock the (airless) Pedestal Column in the highest position using the locking lever (8).

- Take the High Pressure Pump that is supplied with your Pedestal and connect it to the Schrader

Valve on the Air Pressure Block (23).

Bring the air pressure to the desired altitude depending on the camera load that is going to be

used. During detaching of the pump there is some air leaving the system. We recommend to

bring extra air in the system and let some air go out during fine tuning the camera with its

accessories.