ページを印刷する
Figure 5: length adjustment.
Figure 7: tighten (clockwise) or loosen (counter-clockwise) the EVF.
Length adjustment (figure 5)
Please unscrew knob (C) to loosen the clamping part (I). Now you can adjust the position of the rod, please support
the EVF unit with your hand while sliding the rod. When the desired position is reached please tighten knob (C) to lock
the position.
Mounting the Alphatron EVF to the bracket (figure 6, 7 and 8)
Please position the Alphatron EVF unit as shown in "figure 6". The rim of the EVF must be aligned to the rim of the
mount.
When the EVF is positioned correctly please rotate the thumbscrew (E) clockwise (as viewed in "figure 7") to tighten.
To unlock please rotate the screw counter-clockwise.
NOTE: when you can't loosen the thumbscrew (E) because it's tightened too much, please use the following
technique as shown in "figure 8". Place both thumbs at either side of the thumbscrew, press down and to the
right (when holding the bracket and EVF as shown in figure 8).
E
F
C
I
Instruction Manual: Alphatron EVF bracket
TOP SIDE
EVF
Figure 6: Alignment of the EVF.
Figure 8: use two thumbs to unlock the EVF. The red arrow shows
the unlock direction.
RIM
UNLOCK
Page: 3 / 2