- ページ 4

スイッチ ARC IPT-1502のPDF マニュアルをオンラインで閲覧またはダウンロードできます。ARC IPT-1502 5 ページ。 Ip44 outdoor wireless wall switch

will now enter learning mode.

2. On the wall switch press the 'OFF' button intended to be unpaired; the load will flash twice to

confirm that the wall switch is now unpaired.

peration:

ON/OFF Function:

Press the 'ON' button on wall switch, the lights will gradually illuminate.

Press the 'OFF' button on wall switch, the light will gradually turn OFF.

Dimming Function:

1. Make sure the load (light) is switched ON.

2. On the wall switch press the ON button again, the loads will start to dim.

3. To stop at the desired brightness level, press the ON button again.

※ Dimming level dims in cycle, during the cycle if no signal is given『with 4 cycles it will stop at

100% brightness』.

！After setting a dim level using the wall switch the light is then switched OFF, the next time that

the light is switched back ON again the load (light) will return to the previous stipulated brightness.

attery Replacement:

3V CR2032 lithium battery is included.

When the battery voltage is low, the transmission range will be reduced accordingly.

1. Remove top cabinet and insert '—' screw driver in between battery clip and gently lift up to

remove battery.

2. Replace with a new battery then place back the top rocker cabinets.

Version 2.