- ページ 5

スイッチ ARC WBT-913のPDF マニュアルをオンラインで閲覧またはダウンロードできます。ARC WBT-913 5 ページ。 Wireless 2 channel wall switch module

2. On the wall switch press the 'OFF' button intended to be unpaired; the load will flash twice to

confirm that the wall switch is now unpaired.

peration:

ON/OFF Function:

Press the 'ON' button on wall switch, the lights will gradually illuminate.

Press the 'OFF' button on wall switch, the light will gradually turn OFF.

Dimming Function:

1. Make sure the load (light) is switched ON.

2. On the wall switch press the ON button again, the loads will start to dim.

3. To stop at the desired brightness level, press the ON button again.

※ Dimming level dims in cycle, during the cycle if no signal is given『with 4 cycles it will stop at

100% brightness』.

！After setting a dim level using the wall switch the light is then switched OFF, the next time that

the light is switched back ON again the load (light) will return to the previous stipulated brightness.

attery Replacement:

3V CR2032 lithium battery is included.

When the battery voltage is low, the transmission range will be reduced accordingly.

Take out battery compartment and replace fresh new CR2032 cell battery.

roubleshoot:

Problem: I cannot pair my wall switch with the receiver.

Solution: The memory on receiver is full, please delete one or more memory and try pairing again.

Version 1.