- ページ 6

配管製品 Axor Uno 14850001のPDF 取付説明書／保証書をオンラインで閲覧またはダウンロードできます。Axor Uno 14850001 12 ページ。 Axor - hansgrohe, inc. faucet installation instructions / warranty

ページを印刷する

Re-set the High Temperature Limit Stop (optional)

Close the drain OR cover it with a wash cloth.

Use the included 4 mm Allen wrench to push the

screw cover into the handle. Retrieve the screw

cover when the handle is removed.

Use the 4mm Allen wrench to loosen the handle

screw 4 complete revolutions. Remove the

handle and put it in a safe place.

Remove the decorative nut cover and put it in a

safe place.

Remove the handle screw from the stem of the

cartridge. Remove the high temperature limit

stop.

Replace the high temperature limit stop so that

the pin on the cartridge is in the desired slot on

the limit stop. Note: the temperatures given in

the diagram assume a water heater temperature

of 140

F, a cold water temperature of 50

and a water pressure of 45 PSI.

Replace the decorative nut cover. Replace the handle screw. Use the Allen wrench to turn the

screw 4 revolutions.

Replace the handle. Finish tightening the handle screw. Turn on the water and test the faucet.