- ページ 3

アンプ ARC Audio KS125.2 MINIのPDF 取付説明書をオンラインで閲覧またはダウンロードできます。ARC Audio KS125.2 MINI 17 ページ。 Moto series

Step 3-

Running the main harness

A. Remove the main harness from the wire kit

B. Route the unterminated end of the harness behind

and over the fuel tanks outlet hose (See Figure 3A) and

behind the front tank bracket (See Figure 3B) pull

about half way thru and secure with a wire zip tie to

the main harness.

C. Carefully remove the single T40 Torx Bolt securing

the rear of the tank to the frame. (See Figure 3C)

D. Carefully Lift the rear of the Fuel Tank high

enough to pull the main harness up the right side of

the frame up into the inside of the fuel tanks frame

cavity so it is running with the factory wire harness

and pull tight making sure to not pull the harness

thru. (See Figure 3D)

using the previously removed T40 Torx Bolt.

E. Connect the terminated ends to the battery by

removing the factory 10mm side mount terminal

bolts.(See Figure 3E)..... (Make sure there is no fuse

in the fuse holder) and then reconnect.

Step 4 -

Removing the front fairing

A. Remove the (6) T25 bolts from the inside facia edge

of the front fairing assembly. (See Figure 4A + 4B)

B. Next remove the (4) 1/2" nuts securing the lower

fairing light markers (See Figure 4C). Once removed

unplug the lights from the factory disconnect plug that

is secured to the inner fairing wall. Remove lights and

set aside.

Then re-secure the fuel tank

Figure 3A-

Figure 3B-

Figure 3C-

Figure 3D-

Figure 3E-

Figure 4A

Figure 4B

Figure 4C