- ページ 6

バーコードリーダー Cino FuzzyscanのPDF クイック・スタート・マニュアルをオンラインで閲覧またはダウンロードできます。Cino Fuzzyscan 17 ページ。 Bluetooth cordless scanner
Cino Fuzzyscan にも：クイック・スタート・マニュアル (17 ページ), クイック・スタート・マニュアル (17 ページ), クイック・スタート・マニュアル (15 ページ), クイック・スタート・マニュアル (17 ページ), クイック・リファレンス・マニュアル (12 ページ), クイック・スタート・マニュアル (17 ページ)

Use Your FuzzyScan

Both FuzzyScan Barcode commands and Serial commands are available

to configure your scanner. The FuzzyScan barcode commands are a series

of proprietary barcodes which allow you to easily configure the scanner for

most applications. Moreover, the FuzzyScan serial commands are ideal for

precise

and

complicated

reading

control

machine-controllable

environments. Please refer to the relevant documentations for details.

External Trigger and Serial Trigger

The scanner provides both external trigger and serial trigger to activate the

scanning processes. Please note that the external trigger is only available for

universal models. The serial trigger is workable for all models including

RS232 serial and USB COM Port Emulation interfaces.

User Defined Serial Trigger Command

For user's convenience to replace the other existing fixed mount scanner, the

useful user defined serial trigger command allows you to trigger the scanner

without impacting the existing application programs.

Scan Input Time-out

The scan input time-out is an adjustable value for the time period that light

source turns on. It's available for presentation, alternative and level modes.

The scanner keeps the light source on and continues to scan until the defined

scan input time-out is up. You can adjust the time-out duration from 100

milliseconds to 99 seconds to meet various application demands.

OK and NG Outputs

The universal models support additional OK and NG outputs for more precise

reading control. If the scanner got a good read, a signal will be outputted

through the OK pin. However, if the scanner failed to read the barcode during

a reading cycle or preset scan input time-out, a signal will be outputted

through the NG pin.

The OK and NG outputs are designed as NPN signal outputs and preset to

active low. If necessary, you can change the active state of OK and NG

outputs to meet your applications.

Operation Modes

The FuzzyScan Fixed Mount Scanner provides five different operation modes,

including trigger, alternative, level, presentation and force modes to meet

various application demands.

Both the presentation and force modes support triggerless operation, you

don't need to use either external trigger or serial trigger to activate the

scanning. But the trigger, alternative and level modes have to work with

external trigger or serial trigger to scan barcode.