- ページ 12

ラボラトリー機器 Cino FuzzyScan F780BTのPDF クイック・スタート・マニュアルをオンラインで閲覧またはダウンロードできます。Cino FuzzyScan F780BT 17 ページ。 Bluetooth imager
Cino FuzzyScan F780BT にも：クイック・スタート・マニュアル (17 ページ), マニュアル (2 ページ)

ページを印刷する

There are three ways to output the stored barcode data and quantity

information. The preset output format is to transmit stored barcode data as

many times as the quantity indicated. But you still can set the scanner to

outpt the stored barcode data together with quantity information in two fields,

and a prest delimter "," will be output in between. To fulfill different

application requirements, both the delimiter and output sequency can be

changed as well.

As many times as the quantity indicates

How to Transmit Stored Data

The scanner is preset to transmit all stored data by scanning the "Transmit

Stored Data" command. During the transmission, the scanner will emit

continuous short clicks and the link indicator will blink blue. Then the scanner

will give two short beeps after data transmission is completed.

But you are able to set the scanner to transmit the stored data by placing the

scanner onto the cradle as well.

Scan Barcode

Command ◆

How to Delete Last Scanned Data

If you scanned a wrong barcode, the "Delete Last Scanned Data'' command

is helpful to recover mistake. By scanning the ''Delete Last Scanned Data''

command, the last stored data will be deleted.

◆

Transmit Stored Data

Scan command or Place

Scanner onto the Cradle

Delete Last Scanned Data

Place Scanner

onto the Cradle