- ページ 8

溶接システム Arc-Zone DGP-PG3-AのPDF 操作マニュアルをオンラインで閲覧またはダウンロードできます。Arc-Zone DGP-PG3-A 11 ページ。 Heavy-duty tungsten grinder

Arc-Zone DGP-PG3-A 操作マニュアル
REPLACEMENT WHEELS:
Heavy-duty replacement diamond wheels are available directly from Arc-Zone® and can be
ordered online at:
www.arc-zone.com
1.760.931.1500 (worldwide) or fax your order to: 1.760.931.1504.
Select the proper wheel using the Replacement Wheel Guide.
Wheels are in stock for immediate delivery.
REPLACEMENT WHEEL GUIDE:
• For optimum wheel life and surface finish when grinding .040" (1.0mm) through
3/32" (2.4mm) electrodes: Use a 600 Grit Diamond Wheel.
Part Number: A-PTG-6-600 -- (600 grit).
• For optimum wheel life and surface finish when grinding 3/32" (2.4mm) through
3/16" (4.8mm) use a 300 Grit Diamond wheel.
INSTALLING REPLACEMENT GRINDING WHEELS:
Please use the following steps to remove and replace diamond grinding wheels:
1. Turn power off and unplug the electrical outlet. Wait until the motor comes to a complete
stop.
2. Unscrew and remove Knob "A" (see picture of adjusting knobs). Lift up and remove the
Arm, taking care not to loose the washer between the Arm and the Knob. Set them
aside.
3. Unscrew the Thumb Screws on the Wheel Cover. Remove the Wheel Cover to fully
expose the wheel.
4. Using the supplied Allen Wrench, loosen the Wheel Mounting Screws.
5. Remove the old Wheel and mount the replacement Wheel on the Wheel Arbor.
6. Replace all of the other parts in reverse order used to remove them.
^o`JwlkbK`ljI=fåÅ.
qÉäW=TSMKVPNKNRMM
, by phone: 1.800.944.2243 (toll free),
==OMVN=i~ë=m~äã~ë=aêáîÉ=píÉK=`
==UMMKVQQKOOQP
==c~ñW=TSMKVPNKNRMQ
ïïïK~êÅJòçåÉKÅçã=
Copyright 2007, Arc-Zone.com®, Inc. All Rights Reserved.
NJUMMJVQQJOOQP=
ïïïK~êÅJòçåÉKÅçã=
máê~åÜ~=fff=léÉê~íáçåë=j~åì~äW=m~ÖÉ=U=
==`~êäëÄ~ÇI=`^==VOMNNJNRRN=
==bJj~áäW=áåÑç]~êÅJòçåÉKÅçã==
=
=