ページを印刷する
Troubleshooting
The unit does not turn on
•
Check the proper plug of DC cable
•
Check the main switch: it's to be notice the "click" of the switch body when turning
On/Off
No USB connection between Peripheral – PC
•
Turn Off the unit and verify the complete insertion of the USB cable and then turn ON
the unit
•
Replace the cable itself
•
If the PC has a multiple USB ports, connect the LS100 to another port
Check no feeling or multi-feeding occurs
•
Verify the correct alignment (horizontal and vertical) of the checks in the feeder
Jammed check in the path
•
Verify along the path there are not debris of paper or foreign things to be removed.
•
In case of removal of jammed document, pay attention to proceed with care, avoiding to
damage the check itself or to affect the proper setting of some transport items
(i.e.: rubber band)
Scanned image with horizontal lines
•
Slide out the plastic cover of the camera with the bad image and clean it if stained (refer
to maintenance) or proceed in its substitution if scratched or damaged
Scanned image is skewed
•
Verify the check into the feeder is not skewed
•
Verify the correct "in seat" insertion of the covers of the camera if they have been
removed for cleaning operation
Supplies
INK-JET print cartridge (Ink-jet 12 Nozzles)
INK-JET absorbing felt (10 pcs. Pack)
Code TEST-CART—01
Code 09598
Operator Manual
LS100
19