- ページ 9
計測機器 Accurate Technology DigiStop-8のPDF インストレーション＆オペレーションマニュアルをオンラインで閲覧またはダウンロードできます。Accurate Technology DigiStop-8 20 ページ。 Digi-stop series
ページを印刷するThe LCD Display
The above figure illustrates all the segments available on the LCD.
(Not all segments are used on Digi-Stop Systems)
Pressing and holding the
/
and
key for 10 seconds with power off
ON
OFF
UNITS
will perform a full segment LCD test, display the current firmware version, and
RESET ALL PROGRAMMING PARAMETERS TO FACTORY DEFAULTS.
Maintenance
The fence extrusion should be cleaned of debris periodically. Do not use any
liquid lubricants on the scale, as this may impede the encoder's ability to
operate properly and attract other contaminants to the scale.
The readout should be cleaned periodically with compressed air to remove any
dust on the lens and keys. All fasteners should occasionally be checked for
tightness.
Accurate Technology Digi-Stop
Page 9 of 20