- ページ 6

釣具 Accurate Technology Platinum TwinDrag ReelのPDF 使用マニュアルをオンラインで閲覧またはダウンロードできます。Accurate Technology Platinum TwinDrag Reel 12 ページ。

MAINTENANCE

For further details on main-

taing your Accurate ATD

Reel,

please

visit

Tech

Support at our web site:

www.accuratefishing.com/

support/platinum.php

Bearing Maintenance - The Class 5 A.B.E.C. bearings in the ATD are tephlon impregnated in the ball bearing race;

thus, no lubrication is needed for these bearings.

NOTE: Do not lubricate the two small weep holes on the bottom of the reel. These holes are for water to drain

out of the reel.

Wash down your ATD with fresh water after each use. We recommend lightly spraying it to prevent water from being

forced inside. If heavy pressure is needed put the reel in the "Full" drag position. Do not completely submerge the reel into

water. Wipe the exterior parts with an anti-corrosion lubricant. We recommend Corrosion X® by Corrosion Technologies.

Use a good quality reel oil to lubricate all the parts indicated with the oil

Periodically, check all exterior screws to make sure they are tight. Screws may loosen over time with boat vibrations.

We recommend yearly maintenance of your ATD reel with a service professional. Preventative maintenance of your ATD

reel will keep the internal parts in proper working condition and prolong the life of the reel.

Storage - When storing your ATD reel, put the reel in "Free Spool" and the clicker in the on position.

Water

Oil

Clicker on/off

Main DragLever

Five Hex Screws

symbol.

Preset Button Lock

Low Speed Button

High Speed

Button