バーコードリーダー CipherLab 2200のPDF クイック・スタート・マニュアルをオンラインで閲覧またはダウンロードできます。CipherLab 2200 2 ページ。 Locking mount bracket
CipherLab 2200 にも： クイック・スタート・マニュアル (2 ページ)
ページを印刷する
2200 Series Omnidirectional
Presentation Barcode Scanner
Quick Start Guide
Download the user manual and CD contents using GoBetween, available
at
http://ccs.cipherlab.com
.
USB Cable
Connect the USB cable between the scanner and the host computer.
The OPOS Kit can be downloaded from:
http://scanmaster.cipherlab.com/download/opos/CipherLabOPOSKit-latest.exe
USB Port
on the Computer
USB Cable
Dual USB Cable (to 2 Hosts)
Connect the Dual USB cable between the scanner and two host computers which
are both turned on.
The OPOS Kit can be downloaded from:
http://scanmaster.cipherlab.com/download/opos/CipherLabOPOSKit-latest.exe
USB Port
on the Computer
Dual USB Cable
www.cipherlab.com
>
EN
Dual USB Cable (to 1 Host only)
The dual USB connectors are attached to USB ports of a single host computer.
The OPOS Kit can be downloaded from:
http://scanmaster.cipherlab.com/download/opos/CipherLabOPOSKit-latest.exe
Dual USB Cable
Keyboard Wedge Cable
1. Power off the host computer.
2. Disconnect the PS/2 keyboard from the host computer.
3. Attach the PS/2 Male connector to the PS/2 port on the computer.
4. Attach the PS/2 Female connector to the PS/2 keyboard.
5. Power on the host computer.
PS/2 Male
Connector
Keyboard Wedge Cable
USB Port
>>
EN
1. Connect the RS-232 cable between the scanner and the host computer.
2. Fasten the side screws to secure the DB-9 connector.
3. Plug the power adapter into a power outlet nearby.
USB Ports
on the Computer
The scanner equipped with EAS is an optional solution. Attach the included EAS
cable between the scanner and the EAS device.
PS/2 Port
on the Computer
PS/2
PS/2 Female
Connector
Connector
RS-232 Cable
Power Adapter
DB-9
Connector
RS-232 Cable
EAS Connection (Optional)
Connecting to EAS Devices
EAS Cable
EN
RS-232 Port
on the Computer
Side Screw
EAS Receptacle