ページを印刷するSettings Menu
Press the MENU button on the amplifier or the
Use the the navigation buttons on the remote control.
Menu Tree
Streamer Input
Halo Brightness
HP Override
Processor Mode
System Settings
Software Version Displays the software version of the amplifier.
Factory Reset
Software Update
BT AUTOSWITCH
(Bluetooth Input
Auto Switch)
BT Settings
BT Max Volume
Clear (Device)
10
ARCAM A5_A15_A25 OM EN
Select the input that an ARCAM Radia streamer is connected to.
Default is NONE.
Select the brightness of the dial illuminations.
(A25 Only)
Default is FULL.
Select whether speaker remain on or switch off when wired headphones are
connected.
The default is Off (speakers muted). On = speakers unmuted.
Select an input for fixed volume.
Default is OFF.
Processor
Set the volume for fixed volume input set above.
Volume
Default is 25.
Auto standby duration. Select OFF to disable.
Eco Timer
Default is ON.
Change the IR code set if the amplifier remote commands conflict with
another device in your home. Changing this setting does not affect the
IR Code
remote handset.
Default is 16.
Reset the amplifier to factory defaults. Press Select to initiate the reset.
Initiate an update of the amplifier software by USB. Press Select to initiate
the USB. A USB must be present in the SERVICE USB socket with the
amplifier software stored on it for the update to occur.
Enables or disables the automatic switching of the Bluetooth input when
music is played from a connected device.
Default is ON.
Set the maximum volume for the Bluetooth Input.
Default is 30.
Clear the memory of paired devices from the amplifier. Press Select to
List
delete pairings.
on the remote control.