- ページ 2

アダプター Cirago HDX3DV01のPDF マニュアルをオンラインで閲覧またはダウンロードできます。Cirago HDX3DV01 2 ページ。 Displayport to 3 dvi multimonitor adapter

Description

The Cirago HydraDisplay X3 Multimonitor Adapter allows users

to enjoy multiple monitors from a single digital output port for

each application, such as gaming, graphics design or

spreadsheet analysis; or the user can choose to dedicate each

monitor to a separate application. There is no additional system

software or driver required.

System Requirements

The HydraDisplay X3 is compatible with computers which have

a DisplayPort output interface, running most Operating

Systems. This product is for use with listed computers or ITE

equipment.

Installation Overview

Follow the Installation Procedure listed below to install the

Cirago HydraDisplay X3. It is recommended that monitors of

the same size and resolution are used for the connection.

Same type monitors means the monitors have the same native

resolution and same refresh rate.

Installation Procedure

Step 1: Connect DisplayPort input to a video source, such as

desktop or notebook PC DisplayPort output connector. (Cable

for DisplayPort input is provided on the adapter)

Step 2: Connect USB cable provided on the adapter to your

PC or notebook.

Step 3: Connect DVI output port 3, 2 and 1 to three monitors

respectively according to the monitors' display sequence from

left to right.

Step 4: Power on PC and monitors. Select monitors' input port

to DVI.

Step 5: The Cirago HydraDisplay X3 will automatically

configure the output to expanded mode.

Step 6: To change the display to clone mode, change the

output resolution on your PC and select horizontal solution

equivalent to your monitor native resolution or below.

Change the display settings

After installation, you will see the same image on all monitors

(clone mode) or a single image spread across multiple

monitors. To change the display setting, simply change the

graphic card output resolution via the Display Properties

page.