- ページ 8

DVDプレーヤー Arcam DV88のPDF ハンドブックをオンラインで閲覧またはダウンロードできます。Arcam DV88 18 ページ。 Progressive scan output
Arcam DV88 にも：ハンドブック (20 ページ), マニュアル (1 ページ)

ページを印刷する

1. Connecting Outputs: Digital Audio

PAL

PAL60

PAL-M

PAL-N

Black setup (pedestal)

This setting controls the 'pedestal' signal or black level when

the NTSC video standard is used. Note that it does not affect

PAL video in any way.

0 IRE

7.5 IRE This is the standard pedestal level that should be

DV88

PAL is always used as the video standard. Note that

NTSC titles are converted to PAL, but this may cause

some reduction in smoothness of movement. Better

results may be obtained using AUTO; however your

TV must then support NTSC.

This is '60Hz PAL'. This setting may allow NTSC titles

to be played on certain PAL TVs that do not support

NTSC.

A variation of PAL that is used in Brazil

A variation of PAL that is used in Argentina, Paraguay

and Uruguay.

This removes the pedestal from NTSC video. This

setting should be used in Japan, and also if you are

using RGB video, whatever the country.

used in all countries that use NTSC video, with the

exception of Japan.

Audio setup

Au d io S e tu p 3 /3

D ig o u t:

S te r e o PC M

O SD L a n g :

E n g lis h

A u d io d e la y : No r ma l

Dig out (Digital output)

This needs to be set correctly if you are using an external audio

decoder, receiver or D-A converter.

'Bitstream'

The DVD player outputs several different types of audio signal.

The 'Bitstream' setting supports the following audio standards:

2 channel PCM (on CDs or DVDs)

Dolby Digital

MPEG multi channel

DTS multi channel

Use the Bitstream setting if you have an external decoder that

supports Dolby Digital.

'Stereo PCM'

All audio material played is down-mixed to stereo and output

as stereo PCM. Use this setting if you have an external D-A

converter that only supports 2-channel PCM. Note that DTS

audio tracks cannot be converted to PCM.

Completing the setup procedure

Complete the setup procedure by pressing

control. This saves all the data and closes the setup menu. You

can press

at any time while in a menu to quit from it.

SETUP

To return to the setup menu at any time, ensure that there is no

disc playing and press the

SETUP

on the remote

SETUP

button.