- ページ 13

レシーバー Arcam AVR200のPDF ハンドブックをオンラインで閲覧またはダウンロードできます。Arcam AVR200 19 ページ。 Surround sound receiver
Arcam AVR200 にも：サービスマニュアル (15 ページ)

ページを印刷する

TAPE MONITOR

The

button selects the audio output from a

TAPE MONITOR

cassette deck connected to the

TAPE IN

AVR200. It also enables you to monitor a recording being made

on a 3-head cassette deck. Tape monitor status is shown in red

on the display.

When the tape monitor is selected, pressing other source

buttons changes the signal sent to the recorder.

NOTE:

is a latching button: you will need to

TAPE MONITOR

press it again before selecting another source for listening.

The

button selects the source connected to the

sockets.

FM, AM

To select the integrated tuner function of the AVR200, press the

button. See the section 'Using the tuner'.

VOLUME control

To adjust the volume level of the loudspeakers, pre-amp outputs

and headphones use the

VOLUME

shown in the display while it is being adjusted. Three seconds

after the volume is adjusted, the display reverts to show the

selected input.

Note that different sources may require different settings of the

control to achieve the same perceived volume level.

VOLUME

The volume can be controlled from 0dB over 80 steps.

BASS and TREBLE controls

Turn the bass and treble controls clockwise to boost response

or anticlockwise to cut response. For a ﬂ at response leave the

controls in the 12 o'clock 'notched' position.

Pressing the

button bypasses the bass and treble

DIRECT

controls and gives a small improvement to sound quality. If

you do not wish to alter the bass or treble controls, we

recommended that you select

DIRECT

phono sockets of the

phono

control. The volume level is

DOLBY PL II

SPEAKERS

VIDEO 1

MUSIC

after 3 seconds

DOLBY PL II

SPEAKERS

VIDEO 1

MUSIC

AVR200