- ページ 5

スイッチ 3Com CoreBuilder 9000のPDF 取り外しと交換マニュアルをオンラインで閲覧またはダウンロードできます。3Com CoreBuilder 9000 12 ページ。 16 mb expansion memory card installation guide enterprise switch
3Com CoreBuilder 9000 にも：インストレーション・マニュアル (13 ページ), マニュアル (8 ページ), インストレーション・マニュアル (13 ページ)

ページを印刷する

7-Slot Chassis Fan Tray Removal and Replacement Guide

Figure 5 Installing the Fan Tray into the Chassis Using the Handle

Spring-loaded

screw

Fan tray

handle

Spring-loaded

screw

4 Align the fan tray connector (Figure 4) and the backplane connector.

5 Gently push the fan tray inward until the connectors engage.

You feel a slight resistance as the connectors engage.

CAUTION: If the resistance is too great, the fan tray connector and

backplane connector may not be aligned properly. Do not force the fan

tray inward or you can damage the connectors. If necessary, remove

and reinsert the fan tray, ensuring that the connectors are properly

aligned.

6 Verify that the fan tray is flush with the front of the chassis. If the fan

tray and the chassis are not aligned, remove the fan tray and reseat it.

7 Secure the fan tray to the chassis by tightening the two spring-loaded

screws (Figure 5) using a flat-blade screwdriver. Tighten the

spring-loaded screws to a Torque Specification of from 5 to

7 inch-pounds.

To ensure that you tighten screws to Torque Specification, use a torque

screwdriver.