- ページ 4

プリンター Epson 11880 - Stylus Pro Color Inkjet PrinterのPDF クイック・リファレンス・マニュアルをオンラインで閲覧またはダウンロードできます。Epson 11880 - Stylus Pro Color Inkjet Printer 14 ページ。 Stylus pro11880
Epson 11880 - Stylus Pro Color Inkjet Printer にも：パンフレット (1 ページ), パンフレット＆スペック (8 ページ), 開梱・セットアップマニュアル (28 ページ), ネットワーク・マニュアル (46 ページ), 製品情報マニュアル (10 ページ), 限定保証 (12 ページ), パンフレット＆スペック (7 ページ), パンフレット＆スペック (8 ページ)

Using the Auto Take-Up Reel

You can wind paper forward or backward.

Before you print, make sure you press and select .

Set the paper guides to the forward position.

Align the edge of the paper with the horizontal line.

Then press the button to feed the paper.

Use three pieces of tape to attach the paper to the

take-up reel core.

Press the button to feed the paper and create

some slack.

Press the button until appears on the LCD.

Hold down the Auto Forward button on the

control panel to rotate the take-up reel and wind a

small length of paper.

When you're ready to print, make sure Auto Cut is

set to Off in the printer driver.

Set the paper guides to the vertical position.

Align the edge of the paper with the horizontal

and vertical lines. Then press the button to feed

the paper.

Pull the paper around the back of the take-up reel

core and use three pieces of tape to attach the paper

to the core.

Press the button to feed the paper and create

some slack.

Hold down the Auto Backward button on the

control panel to rotate the take-up reel and wind a

small length of paper.

When you're ready to print, make sure Auto Cut is

set to Off in the printer driver. Then send your print

job to the printer.