- ページ 21

プリンター Epson 1280 - Stylus Photo Color Inkjet PrinterのPDF スタートマニュアルをオンラインで閲覧またはダウンロードできます。Epson 1280 - Stylus Photo Color Inkjet Printer 32 ページ。 Product support bulletin(s)
Epson 1280 - Stylus Photo Color Inkjet Printer にも： カートリッジ交換 (2 ページ), 製品サポート速報 (6 ページ), 製品サポート速報 (1 ページ), 補足マニュアル (1 ページ), ユーザーマニュアル (27 ページ), 互換性マニュアル (1 ページ), 補足マニュアル (2 ページ), ここからスタート (2 ページ), パンフレット＆スペック (2 ページ), 製品情報 (13 ページ), スタート・ヒア・マニュアル (6 ページ), 仕様 (2 ページ), ユーザーマニュアル (12 ページ), 製品サポート速報 (3 ページ), 製品サポート速報 (2 ページ), 製品サポート速報 (4 ページ), 製品サポート速報 (7 ページ), 取付説明書 (8 ページ)

ページを印刷する
Epson 1280 - Stylus Photo Color Inkjet Printer スタートマニュアル
Sawgrass Technologies, Inc.
Tips for Successful
Sublimation
Tips for Polyester Fabric
Maintain appropriate heat press times.
§ Shortened pressing time will result in good surface color but the sublimation
dyes will not completely penetrate the polyester fibers. This leaves the dyes
more susceptible to wash out.
§
Longer pressing times will cause the dye molecules to penetrate deeper into the
fiber creating a washed out look. For guidelines on transfer times see the section
entitled Heat Transfer Instructions.
Maintain appropriate heat press temperatures
The correct temperature setting is vital for achieving desired results. Higher
temperatures can damage the polyester fibers to the point that they cannot
properly "hold" the dyes. For guidelines on transfer temperatures see the section
entitled Heat Transfer Instruction.
Maintain appropriate pressure
Too much pressure on the heat press may cause the dyes to penetrate too deeply
into the fabric causing a washed out look. For guidelines on transfer pressure see
the section entitled Heat Transfer Instructions.
Tips for Metal
To obtain the best results when printing onto metal, place the transfer between
the metal and an absorbent cloth or fresh, non-textured paper towel. This will
absorb any dyes that pass back through the paper and any moisture released
during the transfer process. If you have problems with inconsistently filled
areas, this may alleviate the problem.
Tips for Ceramic Tiles and Mugs
When transferring onto ceramic tiles and mugs, immediately peel the paper off of
the ceramic after removing it from the heat press. Once the paper has been
removed, cool the ceramic by submerging it in cool water, or run water over it
from a faucet. If paper residue remains on the surface of the ceramic, clean with
citrus cleaner. If you experience a significant paper-sticking problem, call your
SubliJet reseller for assistance
®
SubliJet IQ
Getting Started Guide for the EPSON Stylus Photo 1280
.
17