Step 2:
With the printer on, press the ink change button indicated by
the ink droplet. In Fig. 2, the button is located to the far right.
Step 3:
Without powering off the printer, unplug the printer from the
wall.
Step 4:
At this point the printer carriage will be centered in the right
opening in the printer top as shown in Fig. 4-1.
The printer carriage lid is removed in 2 parts. The first involves
removing the right most hinge clip, then releasing the left
hinge pivot point.
Fig. 4-2 shows the location of the right clip. Using the
screwdriver as shown in Fig. 4-3, gently pry the clip to the right
to release it. It may take some force as the clip is held in place
by a plastic barb.
S a v e
M o n e y
MIS Associates Inc
http://www.inksupply.com
a n d
I m p r o v e
2901 Auburn Rd.
Auburn Hills, MI 48326
Fax: 248-289-6013
Fig. 2
Fig. 3
Fig. 4-1
Fig. 4-2
Y o u r
P r i n t i n g
800-445-8296
Email: [email protected]