ページを印刷するResetting the AXDIS-FD3
1. The Blue reset button is located inside the interface, between the two connectors.
The button is accessible outside the interface, no need to open the interface.
2. Press and hold the reset button for two seconds, and then let go to reset the interface.
3. Refer to the Programming section from this point.
AxxessInterfaces.com
TROUBLESHOOTING
© COPYRIGHT 2023 METRA ELECTRONICS CORPORATION
AXDIS-FD3
I N S TA L L AT I O N I N S T R U C T I O N S
Having difficulties? We're here to help.
Contact our Tech Support line at:
386-257-1187
Or via email at:
Tech Support Hours (Eastern Standard Time)
Monday - Friday: 9:00 AM - 7:00 PM
Saturday: 10:00 AM - 7:00 PM
Sunday: 10:00 AM - 4:00 PM
K
®
NOWLEDGE IS
Enhance your installation and fabrication skills by
enrolling in the most recognized and respected
mobile electronics school in our industry.
Log onto www.installerinstitute.edu or call
386-672-5771 for more information and take steps
toward a better tomorrow.
Metra recommends MECP
certified technicians
REV. 2/15/23 INSTAXDIS-FD3
P
OWER