- ページ 2

録音機器 Axxess AXDSPX-BM1のPDF 取付説明書をオンラインで閲覧またはダウンロードできます。Axxess AXDSPX-BM1 16 ページ。 Bmw/mini dspxinterface withpre-wired harness (for non-amplified vehicles)2008-2016

Axxess AXDSPX-BM1 取付説明書

INSTALLATION OPTIONS

Adding a subwoofer to a factory system:
The diagram on Page 3 shows the connections that need to be made to add a subwoofer to the
factory system.
Note: RCA jacks sold separately.
Adding a full-range of amps and subwoofer to a factory system:
The diagram on Page 4 shows the connections that need to be made to add: Subwoofer (RCA jacks
sold separately)
Amplifier (SPDT relay E-123 required) or
Additional Amp (RCA jacks sold separately).
Note: The interface provides a 12-volt 1-amp output to turn on aftermarket amp(s). If installing
multiple amps, an SPDT automotive relay will be required if the amp turn-on current of all amps
combined exceeds 1-amp. Use Metra part number E-123 (sold separately) for best results.
2

INSTALLATION

1. Disassemble the dash, unplug all connectors, and then remove the factory radio.†
2. Install the AXDSPX-BM1 vehicle T-harness to the vehicle and make all necessary
connections, but leave the amp turn-on wire disconnected.
3. Plug the AXDSPX-BM1 vehicle T-harness to the AXDSPX-BM1 interface.
4. Plug the AXDSPX-BM1 interface harness to the AXDSPX-BM1 interface.
5. Download and install the AXDSP-XL app from the Google Play Store or Apple App
Store.
6. Open the app then select the Bluetooth Connection tab. Follow the instructions to
pair the mobile device to the interface. Refer to page 6 for more information.
7. Scroll to the Configuration tab then select the vehicle type. Press the Lock Down ‡
button to save the configuration. Refer to page 7 for more information.
8. Connect the amp turn-on wire.
9. Adjust the settings in the app as desired. Press the Lock Down ‡ button to save any
new configurations.
† For dash disassembly instructions, refer to metraonline.com. Enter the year, make,
and model of the vehicle in the Vehicle Fit Guide and find instructions under Metra
Radio Install kits.
‡ Anytime the interface is locked down the key must be cycled off then back on.