- ページ 29

プリンター Epson 2180 - LQ B/W Dot-matrix PrinterのPDF マニュアルをオンラインで閲覧またはダウンロードできます。Epson 2180 - LQ B/W Dot-matrix Printer 30 ページ。 Impact printer
Epson 2180 - LQ B/W Dot-matrix Printer にも：仕様 (2 ページ)

ページを印刷する

Epson 2180 - LQ B/W Dot-matrix Printer マニュアル

Transporting the Printer

If you need to transport your printer some distance, carefully

repack it using the original box and packing materials, as

described below.

Warning:

You will need to move the print head by hand to

remove the ribbon cartridge. If you have just used the

printer, the print head may be hot; let it cool for a few

minutes before touching it.

1. Turn off the printer.

2. Unplug the power cord from the electrical outlet; then

disconnect the interface cable from the printer.

3. Remove any paper loaded in the printer, and remove the

paper guide. Pull out the paper separator from the paper

guide.

4. If a pull tractor is installed, remove it. If any options are

installed, remove them and pack them in their original

boxes.

5. Make sure that the print head is not hot. Then remove the

ribbon cartridge.

6. Remove the paper tension unit. Attach the protective

locking clips on both sides of the printer roller. Then install

the paper tension unit.

7. Make sure the tractor that comes with your printer is

installed in the front push position.

8. Replace the transportation screw using the screwdriver that

came with the printer.

9. Repack the printer, ribbon cartridge, paper guide, paper

separator, and power cord in the original packing materials

and place them in the printer's original box.

- ページ 29

Transporting the Printer

Related Documentation