食器洗い機 arcelik 6343 IのPDF クイック・スタート・マニュアルをオンラインで閲覧またはダウンロードできます。arcelik 6343 I 2 ページ。
ページを印刷するNo rinse agent / No salt / Water cut off indicator
Programme lights
Half Load indicators
Perfect Rinse İndicators
Function keys
On/Off button
To turn the machine on, press and hold down the On/Off button for 1
second. Indicator lights on the panel will illuminate. To turn the machine
off, press and hold down the On/Off button for 1 second. In Off
position, indicator lights will turn off.
Programme Selection button
Refer to "Table of Programme Data and Average Consumption Values"
to select a programme suitable for your dishes. Press the Programme
Selection key repeatedly until the light of the programme you want to
select is illuminated.
Start/Pause/Cancel button
It is used to start, pause or cancel a selected programme or function.
When you press the Start / Pause / Cancel key, the washing
programme you have selected will start.
When your machine is in "Pause" mode, one of the programme follow
up buttons will flash.
A To press the Start / Pause / Cancel key, wait for two
seconds after you turn on your machine by pressing the
On / Off key.
Canceling a programme
Press Start / Pause / Cancel key for 3 seconds to cancel the
programme. Stop pressing when Washing and Drying lights flash
at the same time. Water in the machine will be discharged in 45
seconds. When the End light comes on, the programme will have been
cancelled. Then, you can select and operate a new programme.
A There might be residues of detergent or rinse aid left in
the machine and / or on the pieces washed depending
on the step the programme you have cancelled was in.
Water Cut Off Indicator
If the machine cannot take in water, then the Water Cut Off Indicator will light
on the screen. Once the water flows in, the warning indicator will automatically
switch off.
A When the Water Cut Off indicator lights, make sure that the
water is not cut-off and that the tap is off. Call Authorised
Service Agent if water is not cut-off and the tap is open.
Half Load button
If you want to run your machine without loading it completely, place
your dishes into the machine as you desire. First press the On/Off
button. After you have chosen the programme of your choice, press the
Half Load button and see that the Half Load light on the panel is on.
Start the programme by pressing the Start/Pause/Cancel button and
you can save water and power. You can use every part of the upper
and lower baskets by choosing Half Load.
1
2
3
12
11
10
Delayed Start indicator
Programme follow-up indicators
Start/Pause/Cancel button
Delayed Start button
Perfect Rinse Function
Depending on the type of the detergent used, if a detergent dissolving
issue is encountered it will remove the resulting stains from the dishes
and enables the optimum rinsing performance.
Delayed Start
You can delay the startup of the programme up to 9 hours with
Delayed Start button. Press Start/Pause/Cancel key after setting the
Delayed Start. Once the delay time is over, the selected programme
will start automatically.
Every time you press the delayed start button, the 3-6-9 hour lights
will start flashing respectively. If you press on the Start/Delay/Cancel
button while the selected delayed start button is flashing, the delayed
start light will stay on and the countdown will start. When the delay
period is completed, the delayed start light will go off and the selected
washing programme will begin.
A While the 9 hour delayed start lamp is flashing, if you press the
Delayed Start button, the delayed start lights will go off. If you press the
Start/Delay/Cancel button while the Delayed Start Lights are off, the
programme you have selected will start without any delay period.
AYou can follow the amount of delay time left from the delayed start
lights. For Example: Once you have chosen the 9-hour delay period,
when 6 hours is left for the washing programme to start, the 6-hour light
will come on and when there is 3 hours left, the 3-hour light will come
on.
Changing the Delayed Start Time
Press the Start/Pause/Cancel button. The delay time light will start
flashing. You can select the new delay period by pressing the Delayed
Start button again. Save this by pressing Start/Pause/Cancel key
again.
To cancel the Delayed Start;
Press and hold Start / Pause / Cancel key for 3 seconds. The selected
delay time will have been cancelled. Once the cancelation has started,
the water left in the machine will be discharged in 30 seconds.
6343 - 6343 I - 6343 s
4
5
6
9
8
7
Perfect Rinse Function
Half Load button
Programme Selection button
On/Off button
button