- ページ 10
プリンター Epson 570e - LQ B/W Dot-matrix PrinterのPDF 製品情報マニュアルをオンラインで閲覧またはダウンロードできます。Epson 570e - LQ B/W Dot-matrix Printer 18 ページ。 Warranty statement
Epson 570e - LQ B/W Dot-matrix Printer にも： クイック・リファレンス・マニュアル (15 ページ), 仕様 (2 ページ), 限定保証 (1 ページ)
ページを印刷する
EPSON LQ-570e
The paper thickness lever allows the printer to accommodate
various thicknesses of paper. You can select one of 8 positions
identified by the scale next to the lever.
Use the following table to set the paper thickness lever to match
the thickness of your paper.
10 - EPSON LQ-570e
You can use carbonless multipart forms of up to 5 parts (the
original plus up to 4 copies). Make sure you set the paper
thickness lever to the proper position based on the number of
layers in your form.
For best results with multipart forms, select a straight or almost
straight paper path. It is best to load multipart forms using the
front or bottom slot and the pull tractor.
Except for setting the paper thickness lever, load multipart
forms the same way you load ordinary continuous paper.
When printing, use only labels that are mounted on continuous
backing sheets with sprocket holes for a tractor feeder. Do not
try to print on single sheets because the printer may not
properly feed labels on a shiny backing sheet.
Continuous paper with labels requires a straight or almost
straight paper path. Be sure to use the tractor in the pull
position and load the labels in the front or bottom.
You load labels the same way you load ordinary continuous
paper, except you must set the paper thickness lever to 2 before
printing.
4/00