ページを印刷する
READ ALL INSTRUCTION PRIOR TO INSTALLING YOUR NEW SYSTEM
Thank you for purchasing MT Continuous Ink Supply System. We appreciate your
support and will try our best to make your experience with our products a pleasant one.
Printing has been a different experience ever since you installed MT Continuous Ink
Supply system on your own printer. Just imagining being able to print without regard to
the ink level in those expensive little cartridges.
Please take your time installing MT Continuous Ink Supply system. Do not remove your
old cartridge until you have the MT CIS system primed and ready to install (to prevent
the drying of heads). In addition, make sure you are getting perfect nozzle checks
before installing the MT CIS system. The MT CIS system won't be able to work properly
if the nozzles are previously clogged.
Most people get a perfect nozzle check the first time after installing the MT Continuous
Ink Supply system; others may need to run two or three cleaning cycles or let the printer
sit for a while before they get the perfect results.
II. Getting Started
1. Check the printer head before beginning the installation.
1) Open the window of the Computer and find the Control Panel. Then click
"Printer and Other Hardware"
2) Click the right button of mouse on EPSON Stylus C63 Series. Then click the
Properties and choose the "Nozzle Check" as the below picture shown.