- ページ 6
プリンター Epson ActionLaser 1000のPDF インストレーション・マニュアルをオンラインで閲覧またはダウンロードできます。Epson ActionLaser 1000 7 ページ。 Imaging cartridge replacement procedure
Epson ActionLaser 1000 にも: 紙と紙の配達 (11 ページ), セットアップマニュアル (18 ページ), 製品サポート速報 (8 ページ)
11. Click LaserWriter in the Chooser menu. The name of your
printer appears in the Select a LaserWriter box. Click on the
name of your printer and then close the Chooser.
Note:
If the
computer, you can find it on one
Follow your computer manual instructions to install it on your
Macintosh.
12. begin printing using your application software.
For the EPL-8000
Note:
If
you have an Epson EPL-8000 printer, you must have aj%mware
version 22.48 or later to use Epson Talk. To find out your printer's
firmware version, print a status sheet as described in your printer
manual. If you do not have the above firmware version, please call the
Epson Connection at (800) 922-8911.
1. Press the ON LINE button to take the printer off line.
2. Hold down the SelecType button until the Level 2 light
comes on.
3. Press v until MODE ASSIGN appears on the display.
4. Press b until CH P appears.
5. Press v until CH O appears.
Press F.
6.
7. Press v until CH O PS appears.
8. Press
9. Press 4 to return to MODE ASSIGN.
10. Press v until P-CONFIG.SAVE appears.
LaserWriter printer driver is not yet installed on your
to set the PS setting.
ä
of
your Macintosh System disks.
5