- ページ 9

I/Oシステム DigiDesign 96i I/OのPDF マニュアルをオンラインで閲覧またはダウンロードできます。DigiDesign 96i I/O 20 ページ。 16-input, 2-output digital audio interface features 24-bit analog-to-digital (a/d) and digital-to-analog (d/a) converters
DigiDesign 96i I/O にも：クイックマニュアル (13 ページ), マニュアル (16 ページ)

ページを印刷する

chapter 2

96i I/O Hardware Overview

The 96i I/O Front Panel

Figure 1. 96i I/O front panel

Power Switch and LED Ring

This button turns the 96i I/O on and off.

The LED ring around the power button will light

green to indicate that the unit has powered up

successfully and is connected to an active

Pro Tools|HD system. If the LED ring is orange,

the unit has power, but the computer it is con-

nected to is shut down.

Sample Rate LEDs

These LEDs display the current Pro Tools sample

rate, either 96 kHz, 88.2 kHz, 48 kHz, or

44.1 kHz. (The 96i I/O will go ofﬂine whenever

the current Pro Tools sample rate is 176.4 kHz or

192 kHz.)

Loop Master LED

The LOOP MASTER LED indicates which HD au-

dio interface is the master Pro Tools peripheral.

Loop Master defaults to the first HD I/O con-

nected to the HD Core card. Loop Master will al-

ways be lit in systems with a single interface.

In expanded systems, only one HD I/O can be

Loop Master at a time. When you change the

clock source to an external clock on a particular

HD I/O or a SYNC I/O, that HD I/O (or

SYNC I/O) will automatically become the Loop

Master and all other HD I/Os in the chain will be

switched to Loop Slave mode (see "Sync Mode

LEDs" on page 6).

Chapter 2: 96i I/O Hardware Overview