- ページ 13

プリンター Epson ActionPrinter 3260 sのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Epson ActionPrinter 3260 s 15 ページ。 Epson actionprinter 3260: product information

Remove the connector cover on the printer. Next, insert the

motor unit plug into the connector on the printer, as

shown below.

Attach the ribbon cartridge to the bracket. Next, remove the

packing tape.

Make sure the pins under the ribbon cartridge are placed

correctly inside of the bracket as shown below.

Move the print head to the middle of the printer and move

the sliding part of the ribbon to the middle of the ribbon

cartridge.

24-Pin Printers

6. Turn the ribbon-tightening knob in the direction of the

arrow to remove any slack in the ribbon.

Installing the Color Ribbon

The optional color upgrade kit must be installed before you

install the color ribbon.

Insert the ribbon cartridge (installed in the bracket) into

the printer as shown; then press both sides of the

cartridge firmly to fit the posts into the slots.

Turn the ribbon-tightening knob to ease the ribbon into

place. Make sure it is not twisted or creased.

Replace the printer cover by inserting its tabs into the holes

on the printer as shown below; then close the cover.

1/94

ActionPrinter 3260

AP-3260-13