- ページ 7

スピーカーシステム Axxion ASB-210 BTのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Axxion ASB-210 BT 16 ページ。 Bluetooth soundbar with usb & sd cardreader

buttons on the remote to set the minute accordingly, press the CLOCK button on the

remote again to confirm your setting.

During playback, press and hold the CLOCK button on the remote to check the

current time.

Note: The time only could be set at standby mode.

TIMER SETTING

1. At standby mode, press and hold the TIMER button on the remote. The hour on

the display will begin blinking on the screen with the flashing timer icon "T".

2. Press the TUNING/SKIP/SEARCH buttons on the remote to adjust the hour.

3. Press the TIMER button to confirm. The minute on the display will begin blinking.

4. Press the TUNING/SKIP/SEARCH buttons on the remote to adjust the minute.

5. Press the TIMER button on the remote to confirm your setting.

6. After the set time is reached, the unit will power on to the radio automatically.

7. The timer function can be deactivated or activated by short pressing the TIMER

button on the remote.

USB & SD/MMC CARD PLAYBACK

1. Power on the unit, insert an USB or a SD/MMC card into the unit.

2. Press SOURCE button repeatedly to switch to USB or card mode. The playback

will start automatically.

3. Press the TUNING SKIP/SEARCH FORWARD button on the remote to skip to the

next track; press and hold to search through the track forward.

4. Press the TUNING SKIP/SEARCH BACKWARD button on the remote to skip to

the previous track; press and hold to search through the track backward.

5. Use the numeric buttons to enter the track number to select your desired track for

playback.

BLUETOOTH® OPERATING

This unit can receive stereo audio signal from a BLUETOOTH® stereo audio source

device.

1. Power on the unit, switch to BLUETOOTH® mode by pressing SOURCE button

repeatedly.

2. LED indicator rapid blinking while it is pairing.

3. Enable the Bluetooth® of the Bluetooth® audio source device.

4. Pair and connect to ASB-210 BT(the unit) on the audio source device. If prompted

for passcode, enter "0000".

5. Pairing successful (LED indicator blue), ready to stream music.

6. During playback, press PLAY/PAUSE button to cease or resume the playback.

7. During playback, press TUNING/SKIP/SEARCH FORWARD button to skip to the

next track; press TUNING/SKIP/SEARCH BACKWARD button twice to skip to the

previous track.