- ページ 4
コントロールユニット CIRCUIT DESIGN CDP-RX-07MのPDF 操作マニュアルをオンラインで閲覧またはダウンロードできます。CIRCUIT DESIGN CDP-RX-07M 14 ページ。 Uhf narrow band radio data module
CIRCUIT DESIGN CDP-RX-07M にも： 操作マニュアル (14 ページ)
ページを印刷する
SPECIFICATIONS
Item
Applicable standard
Communication form
Oscillation system
Number of channels
Frequencies [MHz]
* Factory default frequency channel setting.
Frequency setting can be done with the jumpers and also the channel select pins are available with the CDP-RX-07MP. For details,
refer to PIN DESCRIPTION.
Frequency stability
Aging rate
Initial frequency tolerance at delivery
Pulse width
Data rate （FSK)
Operating temp. range
Demodulation
Sensitivity
(12dB/SINAD at CCITT filter)
Sensitivity
(BER <0.1 %)
Selectivity
Adjacent CH selectivity
Spurious radiations
Distortion (AF output)
S/N ratio (AF output)
AF Output level (Fm=1KHz)
Data output
Other outputs
Supply Voltage
Supply current
I/O terminals
Dimensions
Weight
OG_CDP-RX-07M_v10e
CH 3*
CH 2
CH 1
CH 0
(Typ. at 3.0V)
All ratings at 25°C +/- 5°C unless otherwise noted
Specification
EN 300 220 (Receiver category 1)
One way
Crystal based PLL oscillation
4
434.0750 *
433.9200
434.6000
434.7000
< +/- 2.5 ppm (-10 to + 60 °C, reference frequency = 25 °C)
< +/- 1 ppm / Year
< +/- 1.5 ppm (within 1 year after the final adjustment)
208 us - 20 ms
100 - 4,800 bps
-20 °C to + 65 °C
FM Narrow
-120 dBm
-115 dBm
+/-5 kHz at -6 dB point
45 dB
< -60 dBm
< 5 % at 1 kHz
45 dB
-10.5 dBm (Fmod=+/- 3 KHz)
Digital output, pulled up to Vcc (22 k ohm)
RSSI, AF
3.0 to 14 V DC
23 mA (Typ.)
Ant, Gnd, Vcc, Dataout, AFout, RSSIout, Power Control
Channel select (CDP-RX-07MP)
36 X 26 X 8 mm
13 g
4
OPERATION GUIDE
Circuit Design, Inc.
.