- ページ 5
コントローラー DiGidot C4のPDF クイック・スタートアップ・マニュアルをオンラインで閲覧またはダウンロードできます。DiGidot C4 15 ページ。
DiGidot C4 にも： クイック・マニュアル・セットアップ (2 ページ)
ページを印刷する
Product explanation
Extension
Port
Top Status
Light
Button
Input/Output
Port
MicroSD
Analog Jack
Side Status
Light
Ethernet Port
Power Port
* only avaialble on the DiGidot C4 Extended
The extension port on the DiGidot
C4 is used to connect a specially
designed extension board that
expands the capabilities of the
DiGidot C4.
The top status light indicates
whether or not the device is on, if
there is signal detected or if there is
a problem with it. On Page 6 the
different light indications are
described in detail.
The button is used for triggering
actions* and factory resetting.
This connector is used to provide
power to the DiGidot C4, connect
the LEDs or DMX in/out.
Each DiGidot C4* is provided with
a microSD card. The MicroSD card
is used to store Art-net programs
and presets so that LED software is
not required and the DiGidot C4
can operate stand-alone.
A 3,5 mm TRRS jack gives the
opportunity to connect various
triggers.
The side status light indicates the
state of the device. Together with
the Top Status Light they reproduce
the different states. On Page 6 the
different indications are described
in detail.
The Ethernet Ports are used to
connect the DiGidot C4 to a
computer, through which you can
use any type of Art-Net software.
The Ethernet Ports can also be used
for daisy chaining several C4s.
Used to power the DiGidot C4
(5V - 24V).
5