プリンター Epson AcuLaser C900のPDF クイック・リファレンス・マニュアルをオンラインで閲覧またはダウンロードできます。Epson AcuLaser C900 7 ページ。 Epson aculaser c900: install guide
Epson AcuLaser C900 にも: パンフレット&スペック (24 ページ), セットアップシート (2 ページ)
![Epson AcuLaser C900 クイック・リファレンス・マニュアル](/uploads/products/server2/466942/466942.png)
Ready and Error Lights
The ready (green) and error (red) lights on
the top of the printer may be the first
indication of trouble. The status of the lights,
on, off, or flashing, indicates the status of
your printer as described below.
The Status Alert window in the EPSON
Status Monitor 3 utility indicates what type
of error has occurred and offers you a
possible solution. Look through this section
to find the kind of problem you have, then
try the recommended solutions in the order
they are presented until your problem is
solved.
Error light
ON
Flashing slowly
Lights
Ready light
Flashing
OFF
Printer Status
Printer's power is turned off.
Printer is ready for printing, in
Sleep mode, or printing a
job. Warning indicated for
items other than
consumables. To get current
information about the
printer, check the EPSON
Status Monitor 3 utility.
Printer is warming up,
receiving data, resetting the
printer, adjusting for printing,
cooling down, or requesting
users to wait for a moment.
EPSON AcuLaser C900 Quick Reference
Flashing
simultaneously
Flashing
alternately
Note:
If the problem remains after trying the
suggestions in this section, contact your dealer
for assistance.
A consumable product is
almost used up. Check the
alert message on the EPSON
Status Monitor 3 utility and
replace the consumable
with a new one.
There is an error that can be
easily recovered. Check the
alert message on the EPSON
Status Monitor 3 utility for a
solution.
The cover of the printer is
open, the printer is out of
paper, or paper is jammed
in the printer. When printing
with the Duplex Unit, make
sure that the paper size
setting is correct.
Memory module is not
installed or installed
incorrectly in the S0 slot. See
"Memory Module" in the
online Reference Guide.
A protocol error has
occurred. Try turning off the
printer and then turning it
back on. If this does not
clear the error, contact your
dealer or a qualified service
person.
An error has occurred. Try
turning off the printer and
then turning it back on. If this
does not clear the error,
contact your dealer or a
qualified service person.
Ready and Error Lights (1/1)