- ページ 14

プリンター Epson AcuLaser CX11NのPDF 基本操作グードをオンラインで閲覧またはダウンロードできます。Epson AcuLaser CX11N 26 ページ。 Multi-function colour laser printers
Epson AcuLaser CX11N にも：ユーザーマニュアル (17 ページ), 仕様 (4 ページ), セットアップマニュアル (32 ページ), スタート・ヒア・マニュアル (8 ページ), 補足マニュアル (6 ページ), 更新 (1 ページ), 製品サポート速報 (5 ページ), 仕様 (4 ページ)

ページを印刷する

4. Press the u Up or d Down button

several times until your desired group is

selected, then press the r Right button.

The selected group appears in the

second top row in the LCD panel.

Note:

To display the details of the registered group,

press the Advanced/Menu button while

a group is selected. To return to the group

list again, press either the

Advanced/Menu button or the l Left

button.

5. Make the appropriate settings for your

scanning purpose if necessary.

Note:

When you press the x B&W Start button

without making any settings here, the fax

transmission starts with the existing setting

values.

6. Press the x B&W Start button to start the

transmission.

Sending faxes by dialing from a

telephone

When your product has an attached phone,

you can send a fax by dialing from the

phone.

Note:

This function is only available for

black-and-white fax transmissions.

1. Place your original either on the

document table or Auto Document

Feeder. For details, see "Setting your

originals."

2. Dial the number while the attached

phone is on the hook.

3. Press the x B&W Start button after

confirming the recipient to start the fax

transmission.

EPSON AcuLaser CX11 Series Basic Operation Guide

Receiving faxes

Basics of receiving faxes

When the product has an attached phone,

you can select from four reception modes for

receiving a call. The default is set to the Fax

only mode.

Setting item

Description

Auto

The call is received by the

switching

attached phone and the

product automatically answers

after the phone rings for a

certain duration specified by

the Attached Phone Timeout

setting.

Fax only

The product automatically

answers and receives the fax.

Phone only

The call is received by the

attached phone. Fax

reception is not performed.

TAM

When an attached phone

detects a fax/phone signal

while answering an incoming

call, the product automatically

receives the fax.

To change the reception mode, follow the

steps below.

1. Press the

Setup button on the

control panel.

The Setup light is lit and the Setup menu

appears in the LCD panel.

Basic Faxing (Fax Model Only)