- ページ 11

プリンター Epson C11C546011-N - Stylus Photo R200のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Epson C11C546011-N - Stylus Photo R200 12 ページ。 User manual (p.i.m plug-in)
Epson C11C546011-N - Stylus Photo R200 にも：補足マニュアル (1 ページ), スタート・ヒア・マニュアル (9 ページ), ユーザーマニュアル (12 ページ)

ページを印刷する

Epson C11C546011-N - Stylus Photo R200 ユーザーマニュアル

4. If ink accidentally gets inside of the printer, wipe it off with

a damp cloth in the area shown.

Clean here

Warning: Don't touch the gears or any other parts inside the

printer.

Caution: Never use a hard or abrasive brush, or benzine, alcohol, or

paint thinner for cleaning; they can damage the printer components

and case.

Don't get water on the printer components and don't spray

lubricants or oils inside the printer.

Don't use any cleaning sheets included with special paper; they

may jam inside the printer.

Transporting the Printer

If you need to move your printer some distance, you must

prepare it for transportation in its original box or one of a

similar size.

Caution: To avoid damage, always leave the ink cartridges installed

when transporting the printer.

1. Open the printer cover and turn on the printer. Wait until

the print head locks in the far right position, then turn off

the printer.

2. Unplug the power cord from the electrical outlet. Then

disconnect the power cord and USB cable from the printer.

3. Remove any paper from the printer, then push down the

paper support extension, and close the paper support.

4. Make sure the CD/DVD tray guide is closed, then push in

the output tray extension and close the tray.

5. Open the printer cover. Secure the ink cartridge holder to

the printer with tape, then close the printer cover.

6. Repack the printer and its attachments in the original box

using the protective materials that came with them.

Keep the printer level as you transport it.

After transporting the printer, remove the tape securing the

print head and test your printer. If you notice a decline in

print quality, clean the print head (see page 9); if output is

misaligned, align the print head (see page 10).

- ページ 11

Transporting the Printer

Related Documentation