- ページ 3

制御システム Aybey Elektronik ALYAのPDF インストレーション・マニュアルをオンラインで閲覧またはダウンロードできます。Aybey Elektronik ALYA 5 ページ。 Serial communication duplex lop

2- Electrical Connections

2.1 Connect the CANBUS cable terminals to the LOP interface in the control panels (100-

1000-CL1-CH1). The indicator of the side that is not connected to the control panel does

not light.

2.2 If your system includes a shaft pit control box with CAN interface as shown in Figure

3, then connect all LOPs with CANBUS cables with two white rectangular sockets.

2.3 If no electronic shaft pit boards with serial interface are present, then insert 2

terminating resistors into the lower sockets of the LOP at the bottom floor as shown

in Figure 4.

Figure 4

Figure 5