- ページ 4

モニター Aybey Elektronik CBPのPDF プログラミング・インストール・マニュアルをオンラインで閲覧またはダウンロードできます。Aybey Elektronik CBP 4 ページ。 Custom design lcd display board

LOADING DEFAULT LISTS (Only in CBP Board)

CBP board allows you to change all values. Beside this, you can load default lists at any time. Default

lists are adjusted as such that -1, 0, 1, 2..... or 0, 1, 2, 3 from floor 0 to top floor. You can load all these

values at one step.

When you set Floor 0 to a value such as -2 and if you save it by holding ENT, DEC (↓) and INC (↑)

buttons both, then the next floors automatically set to -1,0,1...

RUN MODE

Push and hold INC (↑) and DEC (↓) button to enter run mode settings. In this menu system allows you

to set

Run (Floor Selector) Mode

Board ID (In CBC and CBCT)

Floor Number

Sliding Displays

FLOOR SELECTOR

CBP board can be driven by 7 Segment, Gray Code, Binary Code or Counter systems inputs. CBC and

CBCT boards only can be driven by CANBus. Additional to floor selectors, simulation mode can be

set to simulate system work.

RM letters on display shows Run Mode. Submenus of this mode are

BN:

Binary Code

GR:

Gray Code

7S:

7 Segment

CN:

Counter

CB:

CANBus

SM:

Simulation

ID DEFINITION

(In CBC and CBCT Boards)

ID information of CBC and CBCT boards must be set to identify address of it in CANBus

communication. ID letters on display shows this menu.

FLOOR COUNT DEFINITION

Motion floor count at simulation mode can be set in this menu. SF letters on display shows this menu.

SLIDE DISPLAY SETTINGS

Set this menu to 1 for floor information set as a slide type at changes. SL letters on display shows this

menu.

LOADING DEFAULT SETTINGS

Push and hold ENT, DEC (↓) and INC (↑) buttons both 3 seconds to enter factory defaults mode and

FD letters displays. Press INC (↑) button twice to set factory defaults. All colors and floor information

return to factory defaults.

F/7.5.5.02.104 R:1

CBC /CBCT /CBP