- ページ 6

屋外ライト ARCHIPELAGO LIGHTING iUVC1のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。ARCHIPELAGO LIGHTING iUVC1 11 ページ。 Uvc smart lamp

6. Key Light Indicator

1. After the device is powered on, the button indicator light is blue, and if connected to WIFI, it will turn to green.

2. Short press to switch between fast, fulI, and custom time modes. The indicator of the corresponding mode flashes

slowly during the switching process. After 10 seconds, UVC Smart Lamp starts, the corresponding mode indicator will

always be on. During the operation, the UVC Smart Lamp has a delayed start of 10 seconds to scan for it

any moving object on the premises and to warm-up. Please do not confuse as "not working".

3. During the operation process, when the radar detects that people or pets have entered the environment, the UVC

Smart Lamp will turn off. Short press the button again or restart in the APP to continue disinfection.

4. After the process is completed, the status indicator goes out.

5. App operation--You can select the quick , full, and custom time mode before starting. You cannot change the mode

once UVC Smart Lamp has started. After selecting the desired mode, click the start button n the app and the radar will

operate, and a buzzer will sound. After the delay start up at 10 seconds and no person or pet is detected, the lamp

starts operating, and the status indicator will turn on. During the process, if people or pets have entered the

environment, the APP will prompt that operation is interrupted, press OK to continue the operation, or press Cancel to

terminate.