- ページ 32

プリンター Epson DM-D500 SeriesのPDF インストレーション・マニュアルをオンラインで閲覧またはダウンロードできます。Epson DM-D500 Series 38 ページ。 Customer display
Epson DM-D500 Series にも：製品マニュアル (27 ページ), インストレーション・マニュアル (42 ページ), 仕様書 (2 ページ), インストレーション・マニュアル (37 ページ), ここからスタート (2 ページ)

English

2. Remove the DIP switch cover as shown in illustration 79.

3. Change each setting of the switches with a pointed object, such

as a pen tip or small screwdriver.

4. Close the cover, and turn the power on.

Turning and Tilting the DM-D500

You can turn or tilt the display while holding the support. The

display can be moved easily, so do not move it any further if it

stops. If you move it by force, you may damage it.

With the "DM-D pole unit for IR" (DP-504) and the "DM-D pole

unit for TM printers (Type B)" (DP-503), the display area may not

face the direction you desire. In this case, remove the base, change

the position of the tab on the base so that the display faces in the

direction you desire, and reattach it to the base as shown in

illustration 80.

The display area has the following range of movement:

Tilt: 48 max. (4 steps, 5 positions)

Horizontal rotation: 90 max. (45 for each left and right)

30 DM-D500 Installation Guide

DIP switch cover

45 for left

(you can turn the

same angle for right)