- ページ 17
モニター Aydin Displays VFP19P2のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Aydin Displays VFP19P2 20 ページ。 19.0-inch amlcd flat panel color monitor, rack mount, panel mount, stainless steel & vesa mount models, touch options: resistive, capacitive, saw
ページを印刷する4
Maintenance
4.1
Preventive Maintenance
The window and exterior surfaces may be cleaned with isopropyl alcohol followed by distilled water
rinse, applied with a soft cloth to avoid scratching the anti-reflective coating of the viewing window.
4.2
Troubleshooting (No Picture)
NO PICTURE:
• If the RED LED is lit, verify the FPD is powered on, verify that the signal
cable is properly connected to the display and computer.
• Verify video source is on.
IMAGE PERSISTENCE:
• Image persistence is when a "ghost" of an image remains on the screen
even after the monitor has been turned off. Unlike CRT monitors, LCD
monitors' image persistence is not permanent. To alleviate image
persistence, turn the monitor off for as long as an image was displayed. If
an image was on the monitor for one hour and a "ghost" of that image
remains, the monitor should be turned off for one hour to erase the
image.
IMAGE IS UNSTABLE, UNFOCUSED OR SWIMMING IS APPARENT:
• Signal cable (video) should be completely attached to the computer and
display.
• Use the OSM Image Adjust controls to focus and adjust display by
increasing or decreasing the FINE setting. When the display mode is
changed, the OSM Image Adjust settings may need to be re-adjusted.
DISPLAY IMAGE IS NOT SIZED PROPERLY:
• Use the OSM Image Adjust controls to increase or decrease the H. SIZE
setting.
5
CUSTOMER SERVICE CONTACT INFORMATION:
Customer Service and Technical Support
VFP19-901_manual.doc
Phone:
610-404-5370
E-mail:
11