- ページ 2
屋外ライト CREE LIGHTING Traveyo SeriesのPDF マニュアルをオンラインで閲覧またはダウンロードできます。CREE LIGHTING Traveyo Series 9 ページ。 Nom led street and area light
CREE LIGHTING Traveyo Series にも: 取付説明書 (19 ページ)
Pipe
Pipe Position
Size
+5.0 degrees tilt
+2.5 degrees tilt
0 degrees (no tilt)
1.66 in O.D.
-2.5 degrees tilt
-5.0 degrees tilt
+5.0 degrees tilt
+2.5 degrees tilt
2.38 in O.D.
0 degrees (no tilt)
-2.5 degrees tilt
-5.0 degrees tilt
4
2 of 3
TORQUE VALUES
Bolt Torque
Required (in-lbs)
200 +/-30
200 +/-30
200 +/-30
200 +/-30
200 +/-30
200 +/-30
200 +/-30
200 +/-30
200 +/-30
200 +/-30
Bolt Torque
Required (N-m)
23 +/-3
23 +/-3
23 +/-3
23 +/-3
23 +/-3
23 +/-3
23 +/-3
23 +/-3
23 +/-3
23 +/-3
NEMA
7-PIN PHOTOCELL
®
RECEPTACLE
NOTE:
Dimming capabilities are
accessible through the NEMA
®
receptacle when used with a photo
control with dimming capabilities.
STEP 1:
Rotational adjustment of the photo
tool-less.
control is
STEP 2:
Engage/install photo control into NEMA
receptacle on top of the fixture. If no
photo control will be used with luminaire
install customer supplied shorting plug
into receptacle.
STEP 3:
Firmly rotate photo-control with its
photo-eye approximately in the 'N' north
direction. Some photo-controls operate
best somewhere between NW and NE.
FIELD ADJUSTABLE DIMMING
(OPTIONAL)
NOTE: This luminaire may be provided
with field adjustable dimming.
Luminaires leave the factory adjusted
to the maximum setting specified when
ordered. Visit www.creelighting.com/
products for the product specification
sheet for lumen and power multipliers
for each field adjustable output dim
setting.
STEP 1:
The Dimming module is located inside
the luminaire. Open the cover by
loosening the captive D-ring and allow
the cover to swing open.
STEP 2:
Establish the desired input power
multiplier by referring to the product
dimming spec sheet and turn the switch
to the correlating position. For the half
moon shaped dial the center of the flat
side should be turned to the desired
setting. See Figure 4.
NOTE: The Utility Option will be limited
to the highest setting ordered.
STEP 3:
Close the cover ensuring no wires are
pinched.
LPN00620X0001A1_A
7-Pin