郵便機器 Architectural Mailboxes 7511のPDF 組み立て説明書をオンラインで閲覧またはダウンロードできます。Architectural Mailboxes 7511 2 ページ。 2” round in-ground mailbox post with side braces

ページを印刷する

Thank you for purchasing this premium mailbox post. We know you'll be satisfied with the years of service it will provide. If you have any questions about how to

assemble or install this product, or if you need any replacement parts, please call us directly at (800) 464-7491 or contact us at [email protected].

Assembly Instructions

Tools (not included)

Two open end wrenches

Phillips head screwdriver

- or -

DO NOT install into ground until both post pieces are securely connected using the expansion joiner.

Lay post pieces and the metal expansion

joiner on a flat surface. Then, insert the joiner

into one post piece making sure to align the

screw holes.

Repeat step 1b to properly assemble the

second post piece, making sure to

minimize the gap between the post

pieces.

Correct Post Assembly

Set screw is

making contact

with the

expansion

joiner.

2" Round In-Ground Mailbox Post with Side Braces (Model 7511)

Assembly Instructions

Tools (included)

Hardware (included)

To join the two post pieces:

Hex wrench

x 1, metal expansion joiner

x 2, headless set screws

Insert the headless set screw into the hole and

tighten with the hex wrench.Tighten the screw

until resistance is felt. Then, tighten at least

another rotation to ensure the joiner is locked in

place as shown in the diagram below.

Incorrect Post Assembly

Set screw

completely

Set screw is

recessed.

not making

contact with the

expansion

joiner.

Expansion joiner is

making contact with

the post.

To attach the mailbox to the plate:

(For 3.75" and 11.25" side hole patterns)

(For 5"x5" top hole pattern)

x 4, Phillips screws

x 4, hex bolts

x 8, small washers

x 8, washers

x 4, small hex nuts

x 4, hex nuts

Install the assembled post into

the ground as described in the

instructions for the mailbox. Pay

particular attention to the

location, height, and distance

from the street.

Concrete footing

recommended.

If the 4"x10" top hole pattern or the 11.25" side hole pattern

will be used to mount the mailbox, attach the side metal

braces using the 4 Phillips screws, 8 small washers, and 4

Set screw is

small hex nuts.

exposed.

If the 5"x5" top hole pattern or the 3.75" side hole pattern

will be used to mount the mailbox, do not attach the metal

braces.

Expansion joiner is

not making contact

Lastly, insert hole plugs to fill the two joint holes.

with the post.

www.architecturalmailboxes.com (800) 464-7491

To attach the side metal braces:

x 2, hole plugs

(For 4"x10" top hole pattern)

x 4, Phillips screws

x 4, large hex bolts

x 4, small hex nuts

x 8, large washers

x 4, large hex nuts

This post is designed for use with

many different mailbox styles. For

larger mailboxes, you may need to

use included braces.

hole plugs x2

Rev. F

x 8, small washers

x 2, braces

Phillips screws x4

small washers x8

small hex nuts x4